Chief Engineer (Memphis, TN)

 

Southern Towing Co. is accepting applications for Chief Engineer (Memphis, TN)

The minimum requirements for making an application for employment with Southern Towing Company are:

  1. You must have a valid state driver’s license.
  2. You must be able to read, write, and speak English.
  3. Federal Law requires a DOT (Department of Transportation) drug screen as a condition of employment.  A Licensed or Documented applicant who has a positive drug test must be reported to the nearest U.S. Coast Guard Office.
  4. Federal law also requires that all new employees provide proof of identity and employment eligibility at the time of employment.  You must be able to provide one of the following: a U.S. passport, a certificate of U.S. citizenship, a certificate of naturalization, an unexpired foreign passport with attached employment authorization, or an alien registration card with photograph.  If you do not have any of the above documents, you will be required to provide both a driver’s license or state issued photo I.D. card and one of the following: an original social security card; a certified copy of your birth certificate; or an unexpired INS employment authorization.

This company is an equal opportunity employer. We do not tolerate discrimination in employment based on race, creed, color, national origin or sex. In addition, the Age Discrimination in Employment Act of 1967 prohibits discrimination on the basis of age with respect to individuals who are at least 40 but less than 65 years of age. Also, the Americans with Disabilities Act prohibits job discrimination against qualified individuals with a disability.

REQUIRED CREDENTIALS: All vessel employees are required to hold a valid Transportation Workers Identification Credential (also known as TWIC®). A valid TWIC is required by the Maritime Transportation Security Act for workers who need access to secure areas of the nation’s maritime facilities and vessels. TSA conducts a security threat assessment (background check) to determine a person’s eligibility and issues the credential. Information on applying and enrolling for a TWIC card can be found on the Transportation Security Administration's TWIC Website.

Per Sub-Chapter M Regulation - Vessel Engineers who do not already hold a Merchant Mariners Credential for Fuel Transfers will be required to obtain an MMC - Tankerman (PIC) Restricted to Fuel Transfers on Towing Vessels.

WORK SCHEDULE: The standard work schedule for an engineer is 28 days on the vessel then either 14 or 28 days off. There is normally only one engineer on a boat at a time. Therefore, the daily watch schedule followed by the pilothouse personnel and deck crew does not apply to the engineer. Each engineer will develop a self-directed work schedule which will allow them to be in the machinery spaces on a timely basis and often enough to monitor closely all operating equipment for unusual temperatures, pressures, or other variations from normal operations.

When an engineer is off duty, it is their responsibility to get adequate sleep and rest so they are capable of working safely and efficiently when required. An engineer may be requested to return to a boat during their scheduled time off if an emergency arises.

PHYSICAL DUTIES OF THE JOB: Engineers must be capable of lifting and moving equipment that may weigh in excess of 100 pounds. It will frequently be necessary to move equipment that is heavy, large, and awkward, sometimes from one level to another. Mechanical lifting devices are provided and must be used as necessary. Assistance must be obtained from other members of the crew when appropriate. The engineer must consider the requirements of a particular job prior to undertaking the task so he or she can be assured that all available equipment or assistance is readily available.

All engineers must ascend and descend stairs or ladders, sometimes while transporting tools or objects. They must correctly use portable ladders or stools to allow them to work in the overhead section of machinery spaces and use handrails when appropriate.

The engineer must have color vision that allows them to safely work on electrical systems that have color coded wires; make the distinction between warning, alarm, and normal operating lights; discern system components that are identifiable by color code; and observe basic safety precautions that may be related to color identification.

An engineer's hearing must be adequate for assuring their own personal safety while working in a machinery space which has high levels of background noise and for detecting changes in operating sounds of machinery. He or she shall be capable of communicating in English with the pilothouse or other personnel via portable or fixed VHF radio as well as intercom systems or voice communication.

The engineer must be capable of reading English and to read and understand the various manufacturer’s instruction manuals that describe preventative and corrective maintenance procedures for the equipment aboard their boat. The engineer must also be capable of reading and understanding written directives that may affect their job or emergency assignment.

The engineer must be capable of performing their assigned emergency duties without undue danger to themselves or the boat. The engineer must know how and when to use the emergency equipment located on the boat and be able to properly wear any safety equipment required by their duties.

The physical dexterity required of an engineer demands that he or she be able to manipulate small items in restricted spaces or large objects when using mechanical lifting devices. A broad range of strength and physical dexterity is required. Repairs may require that an engineer reach into difficult to access areas of machinery; work on equipment that has pressurized or hot components; shut off or separate equipment to prevent a safety hazard; trouble shoot equipment that is difficult to access; work in areas that have high noise levels; work below decks in areas that may not be well lighted; and work in restricted spaces.

Engineers are responsible for performing any necessary hot work aboard the boat. Hot work includes welding or cutting with an oxygen-acetylene torch (or similar apparatus). The engineer must be certain that any hot work can be performed safely, with no danger for the crew or boat.

MISCELLANEOUS DUTIES: The engineer is responsible for safe and efficient operation of all the machinery and associated systems aboard the boat. The daily routine will require that periodic inspections be made of all equipment and machinery spaces. The main engines, generators, steering system, gears, shafts, fuel oil system, fire main, electrical distribution system, emergency equipment, deck winches, lights, alarms, water and air piping systems, fuel tanks, compressors, control systems, marine sanitation system and occasionally barge equipment, will require the attention of the engineer.

The engineer shall maintain all the machinery and auxiliary equipment in accordance with the manufacturers recommended standards, as modified by written company policy. They must keep the office advised of problems encountered; parts needed; request assistance when necessary; and assist in major repairs when appropriate. Support from shore-based mechanics will be provided in most repair situations; however, the engineer is responsible for the maintenance and operation of their boat.

The engineer is responsible for the transfer of all fuel oil, lube oil, and chemicals aboard the boat. He or she must make every effort to comply with all pollution prevention laws, company policy, and reasonable safety standards. Pollution of the navigable water is against the operating policy of Southern Towing Company.

The engineer is responsible for the annual servicing of portable fire extinguishers on the boat and barges.

Daily engine room logs shall be maintained accurately and an inventory of all oils and supplies shall be monitored and kept at a level that is adequate to support uninterrupted boat operations.

The engineer is responsible to submit monthly engine oil samples to the Port Engineer.

The engineer is responsible to test the boat's jigger pumps monthly.

The engineer is responsible for the required semi-annual vessel inspection.

When a cook is not assigned the engineer will share food preparation duties with other crew members.

SECURITY DUTIES: The engineer will perform security duties as directed by the Vessel Security Officer. Duties may include standing security watch, controlling access to the vessel and screening of persons, baggage, supplies, stores and personal effects brought on board.

OTHER INFORMATION: Every crew member is required to be aware of and comply with all directives, policies, and procedures contained in the company's Towing Safety Management System (TSMS). Good working relationship with other members of the crew are an important part of the daily routine aboard the boat; every crew member is expected to promote good working relationships.

 

For more information and to apply for this position click here.